High quality lithium polymer battery from Vapex-Tech a manufacturer of Vp-Racing series of High Performance Racing LiPO Batteries. The battery is equipped with a standard Tamiya connector used in many medium RC models however we are able to replace this connector with almost any other popular connector such as Traxxas, Deans, XT60 Ec3 etc. Perfect upgrade to boost your 1/10th scale RC cars, buggys and Monster Trucks with a 45% weight saving over the same size NiMH pack.
Capacity: | 3300mAh | 2S1P |
Weight: | 227g |
|
Max Discharge Current: | 99A | (30C) Continuous |
198A | (60C) Burst | |
Recommended Charge Current: | 3300mA | 1C |
Max Charge Current: | 6600mA* | 2C |
Max Charged Voltage: | 8.5V | 4.25V2 per cell |
Min Discharged Voltage: | 6.0V | 3.0V2 per cell |
Default Connector | 2-pin | Tamiya |
1) This battery is able to withstand charging at 2C, but the recommended maximum charging current is 1C for best results and long lasting use.
The battery is supplied with detailed instructions for safe use, charging & storage, please take a few minutes & read them carefully. TThe balance lead is fitted with a 4-pin JST-XH type connector, one of the most popular in this type of battery and is compatible with our chargers.
2) Please Note: Exceeding the above values ie less than 3v per cell and above 4.25v per cell may cause irreparable damage to the battery (manifested by swelling or in extreme case self-ignition) and loss of warranty.
SKU | RD330-PL-63 |
Weight (g) | 43.82 |
Manufacturer | Vp-Racing |
Voltage (V) | 7.4 |
Capacity (mAh) | 637.09 |
Length (mm) | 26.45 |
Width (mm) | 9.07 |
Height (mm) | 4.83 |
Cell Type | LiPO |
Wire Gauge (AWG) | 12awg |
Connector | Tamiya |