High quality lithium polymer battery from Giant Power. The battery is equipped with a Deans connector used in many medium RC models.
Capacity: | 4000mAh | 2S1P |
Weight: | 222g |
|
Max Discharge Current: | 140A | (35C) Continuous |
280A | (70C) Burst | |
Recommended Charge Current: | 4A | 1C |
Max Charge Current: | 20A1 | 5C |
Max Charged Voltage: | 8.5V | 4.25V2 per cell |
Min Discharged Voltage: | 6V | 3.0V2 per cell |
Default Connector | 2-pin | Deans |
Balance Connector | 3-pin | JST-XH |
1) This battery is able to withstand charging at 5C, but the recommended maximum charging current is 1C for best results and long lasting use.
The battery is supplied with detailed instructions for safe use, charging & storage, please take a few minutes & read them carefully.
2) Please Note: Exceeding the above values ie less than 3v per cell and above 4.25v per cell may cause irreparable damage to the battery (manifested by swelling or in extreme case self-ignition) and loss of warranty.
SKU | LN2S4000-PL-55 |
Weight (g) | 42.36 |
Manufacturer | Giant-Power |
Voltage (V) | 7.4 |
Capacity (mAh) | 763.19 |
Length (mm) | 28.24 |
Width (mm) | 8.78 |
Height (mm) | 3.05 |
Cell Type | LiPO |
Wire Gauge (AWG) | 12awg |
Connector | Deans |